Updating bios on emachines

Finding the correct driver for your device has never been easier.

Driver Guide maintains an archive of supported Emachines BIOS / Motherboard drivers available for free Download for the most popular Emachines products and devices.

I am confused about the instructions in ASUS Website about installing new BIOS via DOS prompt. Pins 1-2 once shorted will clear NVRAM and reset all ESCD Settings This is another method that can be used to reset the BIOS on the system by simply removing the CMOS coin cell battery and then clearing power from the system.This is commonly done if you cannot access the jumpers or if you are dealing with a laptop system.Does anyone know if that bios would give me more control over the memory speeds and maybe some overclocking?Is there a way to update the e Machines e520 BIOS under Ubuntu, or do I need to (or should I even attempt to) create a DOS boot disc to do it?Developed by a modding expert, UEFI BIOS Updater has scarce competition, being one of the few tools on the market that can perform BIOS modding with low chances of BIOS failures.The application can carry out a favorable outcome for users who are less experienced in this sort of endeavors, however a minimum amount of knowledge is required in order to perform the operations safely.Once the jumpers are correctly set and power is supplied this will then reset the BIOS on the system. The NVRAM will be cleared when the jumper is closed (use the jumper from the password bridge (PSWD)).To properly clear; AC power must be applied (not necessarily turned on) to the system for about 10 seconds while the jumper is closed.Their customer service tells me I can't do it under Linux, but I trust you guys more than them.The file they had me download is here if you need to see it: